Supplies| Description | Quantity | Approximate
Price |
|---|
| Complete tool kit 4300 | 1 | |
| 8 to 10-drawer rollaway cabinet---26 3/8" x 32 3/8" x 18" with panel front locks, 3" roller bearing wide tread casters, 2 rigid and 2 swivel with brake | 1 | |
| 1/4" drive socket, 6 or 12 point standard length: 3/16" to 1/2" | 1 | |
| 1/4" drive sockets, 6 or 12 point deep length: 9/32" to 1/2" | 1 | |
| 1/4" drive phillips head bit #2 | 1 | |
| 1/4" drive 2" & 6" extensions | 1 | |
| 1/4" drive ratchet reversible 5" approximate | 1 | |
| Air driven ratchet, any brand | 1 | |
| 1/4" drive universal swivel joint socket | 1 | |
| 3/8" drive sockets, 6 or 12 point standard length 6 mm to 18 mm | 1 | |
| 3/8" drive sockets 6 or 12 point deep length 6 mm to 18 mm | 1 | |
| 3/8" drive sockets, 6 or 12 point standard length 3/8" to 7/8" | 1 | |
| 3/8" drive sockets, 6 or 12 point deep length 3/8" to 7/8" | 1 | |
| 3/8" drive 3" & 6" extensions | 1 | |
| 3/8" drive ratchet, reversible 7" approximate | 1 | |
| 3/8" drive universal swivel joint socket | 1 | |
| 3/8" drive phillips head bit #3 | 1 | |
| Open end/box end wrenches: 8mm to 18 mm | 1 | |
| Open end/box end wrenches 3/8" to 3/4" | 1 | |
| 8" adjustable wrench (Crescent wrench) | 1 | |
| Allen wrenches standard 7 key set: 5/64" to 1/4" | 1 | |
| Allen wrenches standard 7 key set: 1.5 to 10. | 1 | |
| Torx socket set: T-10 to T-50 | 1 | |
| High speed drill bit set: 1/8" to 3/8" | 1 | |
| Screw driver sets: standard and phillips | 1 | |
| 7" heavy duty diagonal cutting pliers (wire cutting pliers) | 1 | |
| 8" & 10" standard vise grip pliers | 1 | |
| Aviation tin snips (straight cut) | 1 | |
| Pry bar, approximately 5/8" X 16" long | 1 | |
| Aligning drift punch, 1/4" X 9" | 1 | |
| Center punch, 1/4" X 6" | 1 | |
| Cold chisel, 1/2" X 6" | 1 | |
| 1 1/2: & 3" putty knifes | 1 | |
| 14" 8 tooth vixen body file with metal or wood handle | 1 | |
| 3" X 17" abrasive holder: "Long board" | 1 | |
| 3" X 5" flexible sanding block | 1 | |
| 3" X 5" wet sanding block | 1 | |
| 3" X 8" wet sanding block | 1 | |
| 6" pick body hammer | 1 | |
| Cross pein body hammer | 1 | |
| 3/4lb. Ball pein hammer | 1 | |
| 3lb cross pein sledge hammer | 1 | |
| Scratch awl or ice pick | 1 | |
| All purpose dolly (good quality) | 1 | |
| Toe & heel dolly (good quality set) | 1 | |
| 10" round rat''s tail file w/handle | 1 | |
| 10" flat file w/handle | 1 | |
| 1/4" arbor wire cleaning brush | 1 | |
| Hand wire brush | 1 | |
| Hand wire brush(stainless steel) for aluminum | 1 | |
| Hack saw w/blade | 1 | |
| Window & door handle remover tool | 1 | |
| Trim Panel Remover tool | 1 | |
| Reveal molding clip release tool | 1 | |
| Windshield wiper removal tool | 1 | |
| Light Slapping Spoon: thinner is better | 1 | |
| Metal or plastic body filler spreaders, 1 set | 1 | |
| Spreader/mixing board | 1 | |
| 2" paint brushes, you will need at least two | 1 | |
| Fresh air respirator 1/2 mask or full hood (survivair brand) | 1 | |
| FOR ADVANCED REFINISHG STUDENTS | 1 | |
| Razor blade holder w/50 blades (square razor blades) | 1 | |
| Blow gun: Must meet OSHA Standards | 1 | |
| Male quick disconnect coupler: e.g. Milton 727, Am flow # CP21D | 1 | |
| Nitrile or Latex examination gloves: at least 1 box | 1 | |
| Leather work gloves and or welding gloves | 1 | |
| Ear plugs: at least 1 set | 1 | |
| Small flashlight | 1 | |
| 1" wide gasket scraper | 1 | |
| Tape measures standard & metric | 1 | |
| Paint gun regulator (devilbiss or sharpe) | 1 | |
| Drop light with covered bulb | 1 | |
| Binder 3 ring (hard) with paper for ACRR 0146 20 | 1 | |
| Complete tool kit | 1 | $4,300.00 |
| Total | $4,300.00 |
